View In:
ArcGIS JavaScript
ArcGIS Online Map Viewer
ArcGIS Earth
ArcMap
ArcGIS Pro
View Footprint In:
ArcGIS Online Map Viewer
Service Description: Between 2003 and 2005, a team from Geoscience Australia (Liu et al. 2005) generalised the New South Wales geology dataset of Xie (2003) to produce a seamless 1:1 000 000 scale geology map of NSW. In addition, the team added provisional datasets from the Goulburn and Cargelligo 1:250 000 mapping project areas and 1:100 000 scale mapping from the Cobar and Nymagee 1:250 000 map sheet areas. Synthesis datasets from western New South Wales (Laing et al. 1996) and the Murray Basin region (Brown & Stephenson 1991) were also integrated (Figure 1). The Geoscience Australia team then produced a seamless state dataset by edge matching the various source datasets which often did not agree due to their widely varying ages and compilation scales. Adjustment of some of the older geological datasets was made using geophysical data interpretation, particularly where poor edge matching or spatial accuracy (± 1 km) was identified in the source data. Due to the 1:1 000 000 scale, many smaller units from the 1:250 000 source datasets were deleted, merged or enlarged.
Between 2006 and 2008, Gary Colquhoun (Geological Survey of New South Wales) performed substantial edits on the Geoscience Australia 1:1 million scale geology dataset with the aim of producing a New South Wales geology map at 1:1 500 000 scale. These edits comprised:
• Simplifying the geological unit symbology by changing from a stratigraphic unit-based code to an age-lithology code (see below for explanation).
• Merging many units as a result of this code simplification.
• Deleting, or merging many polygons which were too small for display at 1:1 500 000 scale.
• Substantial generalisation of geological linework to reduce nodes for smoother display.
• Subdividing plutonic and volcanic rocks based on type (I-type, S-type, etc). These data were derived from a variety of sources, namely: Eastern Lachlan Orogen Geoscience database (Glen et al. 2006); NSW AMIRA geochemical database; and numerous unpublished geochemical datasets held by the Geological Survey of New South Wales.
• Many areas were reclassified to emphasise bedrock data rather than a thin veneer of regolith (eg. Qr/Ks was reclassified as Ks not Qc). This involved merging and simplifying many hundreds of rock unit polygons.
• Minor changes in stratigraphic nomenclature were made to make the data consistent with the Eastern Lachlan Orogen dataset (Glen et al. 2006).
• To enable easier simplification to 1:1 500 000 scale, the original Cobar and Nymagee 1:250 000 metallogenic sheet data were added, replacing many 1:100 000 scale datasets added by Geoscience Australia in these areas.
• The finalised Cargelligo 1:250 000 geology map (Meakin et al. 2006) was added and simplified. An updated preliminary Goulburn 1:250 000 geology map was also added and simplified.
EXPLANATION OF GEOLOGICAL LETTER SYMBOLS USED ON THE MAP
The geological units of the map have been symbolised using a code to convey generalised age-lithology information about a geological unit.
1st letter: the first letter indicates the geological period or era and is represented on the vertical column of the geology legend (eg. P = Permian; D = Devonian; O = Ordovician, etc.). Note that some geological periods or eras use 2 letters (eg. Cz = Cainozoic) and can have a letter different to the initial letter of the period due to some periods sharing the same initial letter (eg. E = Cambrian; K = Cretaceous).
2nd letter: the second letter represents the type of rocks in the unit and relates to the top row of headings on the geology legend (eg. Cs = Carboniferous sedimentary rocks; Sm = Silurian mafic intrusions). Note that mixed sedimentary and volcanic units use two letters and have been annotated “sv”
3rd letter: the third letter generally subdivides the igneous rocks into I-type, S-type, A-type or undifferentiated (e.g. Dvi = Devonian volcanics I-type; Sgs = Silurian granite S-type).
CREDITS
Bibliographical reference: GEOLOGICAL SURVEY OF NEW SOUTH WALES. 2009.New South Wales 1:1 500 000 Geology Map. First edition. Geological Survey of New South Wales, Department of Primary Industries, Maitland, NSW, Australia.
Geology compiled and edited by J. Xie,, G.P. Colquhoun (Geological Survey of New South Wales) O.L. Raymond, S.F.Liu, A.J. Retter, D. Phillips, A. Kernich, D.S. Percival, C. Macgregor(Geoscience Australia).
Explanatory text by G.P. Colquhoun.
Technical editing by: J. Greenfield, P. Blevin, J. Stroud, D. Pogson.
Cartography by: W. Zhang, L. Mills, L. Li.
Topographic base map data were compiled and extensively edited by L. Mills from digital data supplied by Geoscience Australia, Canberra.
Front cover photograph by D. Barnes
Printed by Department of Lands. Panorama Avenue, Bathurst, New South Wales
Published by Department of Primary Industries 2009
Map Name: Layers
Legend
All Layers and Tables
Dynamic Legend
Dynamic All Layers
Layers:
Description:
Copyright Text: GEOLOGICAL SURVEY OF NEW SOUTH WALES. 2009.New South Wales 1:1 500 000 Geology Map. First edition. Geological Survey of New South Wales, Department of Primary Industries, Maitland, NSW, Australia.
Spatial Reference:
102100
(3857)
Single Fused Map Cache: true
Tile Info:
- Height: 256
- Width: 256
- DPI: 96
-
Levels of Detail: 24
-
Level ID: 0
[ Start Tile, End Tile ]
- Resolution: 156543.03392800014
- Scale: 5.91657527591555E8
-
Level ID: 1
[ Start Tile, End Tile ]
- Resolution: 78271.51696399994
- Scale: 2.95828763795777E8
-
Level ID: 2
[ Start Tile, End Tile ]
- Resolution: 39135.75848200009
- Scale: 1.47914381897889E8
-
Level ID: 3
[ Start Tile, End Tile ]
- Resolution: 19567.87924099992
- Scale: 7.3957190948944E7
-
Level ID: 4
[ Start Tile, End Tile ]
- Resolution: 9783.93962049996
- Scale: 3.6978595474472E7
-
Level ID: 5
[ Start Tile, End Tile ]
- Resolution: 4891.96981024998
- Scale: 1.8489297737236E7
- Format: PNG
- Compression Quality: 0.0
- Origin: X: -2.0037508342787E7
Y: 2.0037508342787E7
- Spatial Reference: 102100
(3857)
Initial Extent:
XMin: 1.5502514849294858E7
YMin: -3790026.859843877
XMax: 1.742995095453335E7
YMax: -3075799.26754738
Spatial Reference: 102100
Full Extent:
XMin: 1.5695970275870316E7
YMin: -4509714.130317166
XMax: 1.7102950447134808E7
YMax: -3268829.1664373535
Spatial Reference: 102100
Units: esriMeters
Supported Image Format Types: PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP
Document Info:
Title: NSW 1500K Geology
Author: colquhog
Comments: Between 2003 and 2005, a team from Geoscience Australia (Liu et al. 2005) generalised the New South Wales geology dataset of Xie (2003) to produce a seamless 1:1 000 000 scale geology map of NSW. In addition, the team added provisional datasets from the Goulburn and Cargelligo 1:250 000 mapping project areas and 1:100 000 scale mapping from the Cobar and Nymagee 1:250 000 map sheet areas. Synthesis datasets from western New South Wales (Laing et al. 1996) and the Murray Basin region (Brown & Stephenson 1991) were also integrated (Figure 1). The Geoscience Australia team then produced a seamless state dataset by edge matching the various source datasets which often did not agree due to their widely varying ages and compilation scales. Adjustment of some of the older geological datasets was made using geophysical data interpretation, particularly where poor edge matching or spatial accuracy (± 1 km) was identified in the source data. Due to the 1:1 000 000 scale, many smaller units from the 1:250 000 source datasets were deleted, merged or enlarged.
Between 2006 and 2008, Gary Colquhoun (Geological Survey of New South Wales) performed substantial edits on the Geoscience Australia 1:1 million scale geology dataset with the aim of producing a New South Wales geology map at 1:1 500 000 scale. These edits comprised:
• Simplifying the geological unit symbology by changing from a stratigraphic unit-based code to an age-lithology code (see below for explanation).
• Merging many units as a result of this code simplification.
• Deleting, or merging many polygons which were too small for display at 1:1 500 000 scale.
• Substantial generalisation of geological linework to reduce nodes for smoother display.
• Subdividing plutonic and volcanic rocks based on type (I-type, S-type, etc). These data were derived from a variety of sources, namely: Eastern Lachlan Orogen Geoscience database (Glen et al. 2006); NSW AMIRA geochemical database; and numerous unpublished geochemical datasets held by the Geological Survey of New South Wales.
• Many areas were reclassified to emphasise bedrock data rather than a thin veneer of regolith (eg. Qr/Ks was reclassified as Ks not Qc). This involved merging and simplifying many hundreds of rock unit polygons.
• Minor changes in stratigraphic nomenclature were made to make the data consistent with the Eastern Lachlan Orogen dataset (Glen et al. 2006).
• To enable easier simplification to 1:1 500 000 scale, the original Cobar and Nymagee 1:250 000 metallogenic sheet data were added, replacing many 1:100 000 scale datasets added by Geoscience Australia in these areas.
• The finalised Cargelligo 1:250 000 geology map (Meakin et al. 2006) was added and simplified. An updated preliminary Goulburn 1:250 000 geology map was also added and simplified.
EXPLANATION OF GEOLOGICAL LETTER SYMBOLS USED ON THE MAP
The geological units of the map have been symbolised using a code to convey generalised age-lithology information about a geological unit.
1st letter: the first letter indicates the geological period or era and is represented on the vertical column of the geology legend (eg. P = Permian; D = Devonian; O = Ordovician, etc.). Note that some geological periods or eras use 2 letters (eg. Cz = Cainozoic) and can have a letter different to the initial letter of the period due to some periods sharing the same initial letter (eg. E = Cambrian; K = Cretaceous).
2nd letter: the second letter represents the type of rocks in the unit and relates to the top row of headings on the geology legend (eg. Cs = Carboniferous sedimentary rocks; Sm = Silurian mafic intrusions). Note that mixed sedimentary and volcanic units use two letters and have been annotated “sv”
3rd letter: the third letter generally subdivides the igneous rocks into I-type, S-type, A-type or undifferentiated (e.g. Dvi = Devonian volcanics I-type; Sgs = Silurian granite S-type).
CREDITS
Bibliographical reference: GEOLOGICAL SURVEY OF NEW SOUTH WALES. 2009.New South Wales 1:1 500 000 Geology Map. First edition. Geological Survey of New South Wales, Department of Primary Industries, Maitland, NSW, Australia.
Geology compiled and edited by J. Xie,, G.P. Colquhoun (Geological Survey of New South Wales) O.L. Raymond, S.F.Liu, A.J. Retter, D. Phillips, A. Kernich, D.S. Percival, C. Macgregor(Geoscience Australia).
Explanatory text by G.P. Colquhoun.
Technical editing by: J. Greenfield, P. Blevin, J. Stroud, D. Pogson.
Cartography by: W. Zhang, L. Mills, L. Li.
Topographic base map data were compiled and extensively edited by L. Mills from digital data supplied by Geoscience Australia, Canberra.
Front cover photograph by D. Barnes
Printed by Department of Lands. Panorama Avenue, Bathurst, New South Wales
Published by Department of Primary Industries 2009
Subject: The New South Wales 1:1 500 000 scale geology map represents an up-to-date synthesis of the surface geology of the state. The map has been compiled principally from 1:250 000 scale geological map data from the Geological Survey of New South Wales.
Category:
Keywords: New South Wales,Geology,1:1.5 million
AntialiasingMode: None
TextAntialiasingMode: Force
Supports Dynamic Layers: true
MaxRecordCount: 1000
MaxImageHeight: 4096
MaxImageWidth: 4096
Supported Query Formats: JSON, geoJSON
Supports Query Data Elements:
Min Scale: 5.91657527591555E8
Max Scale: 9027.977411
Supports Datum Transformation: true
Child Resources:
Info
Dynamic Layer
Supported Operations:
Export Map
Identify
QueryDomains
QueryLegends
Find
Return Updates
Generate KML